How to install Wallpaper
install
Wall must be well painted • Do not apply any glue • Wallpaper comes pre-pasted
1
- Prepare the wall
- The wall surface should be clean and smooth
- Turn off the electricty
mains if power points
are present - Wipe down wall with
water – use sugar soap
if necessary
2
- Lay down plastic or a drop sheet
3
- Arrange the wallpaper in order
4
- Use water sprayer
- Spray your first panel on print side (work L to R)
- Turn panel over
5
- Fold the ends of the panel to meet in the centre
- Leave for 1 minute
6
- Peel up the top end of the panel
- Align the top left corner with the top left corner of your wall
- Panel can be slid around and re-positioned easily
- Pull out the bottom half of the panel
- Allow to fall into place
7
- Work top to bottom with a sponge
- Press down at centre
- Wipe towards the edges
- Remove large bubbles
and creases until smooth
8
- Wipe the edges of the panel with a cloth and a bucket of water to remove any glue residue
9
- Repeat with next panel
- Line up image
- Overlap 5-10mm
10
- Repeat